MCU Virgin Chip SPC560B60L3 for Land Rover Jaguar 2017+ KVM (RFA) IMMO Box

MCU Virgin Chip SPC560B60L3 for Land Rover Jaguar 2017+ KVM (RFA) IMMO Box

SPC560B60L3 Virgin Chip for Land Rover Jaguar 2018+ KVM RFA

The Land Rover/Jaguar KVM MCU after 2018 is OTP (one-time programming). If you need to program a new key, you must replace the MCU. This is the best way to change the KVM to virgin mode without replacing the KVM unit.

Use a Programmer like VVDI or xPROG to Read the MCU chip Data, after you write back the files to the chip it’s possible to program the unit back in the car using SDD or Pathfinder.

There are many different KVM part numbers, so it is impossible to stock them. If you have an SDD or Pathfinder Package with a KVM Programming tool then you can code the same KVM you took out back into the vehicle after it has been virginsed as if it came from the Factory or Dealer in new Blank Condition.

KVM EEPROM file options are as the below:

• AH42-19H440-AF
• FK72-14C104-AD
• FK72-19H440-AF
• FK72-19H440-CA
• FK72-19H440-BH
• FK72-19H440-BD
• FK72-14C104-BC
• FK72-14C104-BF
• FK72-14C104-BA
• FK72-14C104-AD
• JPLA-14F041-BD
• JPLA-19H440-DE
• K8D2-14C250-BA
• K8D2-19H440-AB
• K8D2-19H440-BC
• DPLA-19H440-BB
• DPLA-19H440-AF
• DPLA-19H440-CA
• DPLA-19H440-BC
• DPLA-19H440-BJ
• DPLA-19H440-AB
• DPLA-19H440-AD
• DPLA-19H440-BD
• DPLA-70718-NM
• DPLA-19H440-AC
• DPLA-19H440-BF
• HPLA-19H440-BD
• or any others you can specify